hx228 Kiethly metrobyte modules replaced Adam module used for the 
collection of data from the SBE cond. and temp. probes

Weather data is back on line but only data from the starboard pack was available.
HX230 Data set changed Differential GPS indicator added , line 24
HX235 Removed Differential GPS Indicator, Line 24 now equals temp frequency.
HX239 Relative humidity is not functioning
HX239 Winch data added to Dasylab files
HX244 seachest fluorometer cleaned between prior to cruise and twice during cruise.
      First cleaning was not logged and occured around EXP 11 Second Cleaning of the 
      fluorometer was prior to file hx244_23.ASC (data collection to file hx244_22.ASC
      was stopped flourometer was cleaned and Hx244_23.ASC starts with cleaned fluorometer) 
HX248 Cond probe changed 369 removed 367 added 8/1/001 11:21 AM GMT hx249_03.ASC
HX252 Seachest Flurometer SN275 was replaced by SN88 off of old MOCNESS unit
Hx252B Weather packs removed for repair 10/18/2001
Hx253 Weather packs reinstalled relative humidity is working 
HX257 Port side weather pack wired in
HX269 Fluorometer not functional
HX270 Fluorometer SN88 Replaced by SN275 

1. True Heading from Sperry MK 37 Gyro
2. Latitude NorthStar 800 GPS
3. Noth or South component of latitude (Decimal 78=N) (Decimal 83=S)800 GPS
4. Longitude NorthStar 800 GPS
5. East or West Component of Longitude (Decimal 69=E) (Decimal 87=W)800 GPS
6. GMT time  NorthStar 800 GPS
7. Course over ground NorthStar 800 GPS
8. Speed over ground NorthStar 800 GPS
9. GMT Time Trimble
10. Latitude Trimble GPS
11. Noth or South component of latitude (Decimal 78=N) (Decimal 83=S)Trimble GPS
12. Longitude Trimble GPS
13. East or West Component of Longitude (Decimal 69=E) (Decimal 87=W)Trimble GPS
14. Speed over ground Trimble GPS
15. Course over ground Trimble GPS
16. Day Month Year Trimble GPS
17. Relative wind direction from coastal environmental (upwind sensor automatically selected)
18. Relative wind Speed from coastal environmental (upwind sensor automatically selected)
19. Temperature from coastal environmental (located on the top of the mast)
20. Relative Humidity from coastal environmental (located on the top of the mast)
21. Barometric pressure from coastal environmental (located on the top of the mast and corrected for location)
22. Depth from Furuno 28 kHz Sounder
23. Depth from Knudsen 12 kHz Sounder
24. Temp frequency From SBE temp probe SN737
25. Temperature Calculated

temp (981) (Calibration  Nov 07 2002)

1/(4.71431437e-03+6.55464367e-04*(ln(1000.000/in(0)))
+2.86391252e-05*(ln(1000.000/in(0)))^2
+2.86259365e-06*(ln(1000.000/in(0)))^3) -273.15


26. Conductivity frequency From SBE cond probe SN638
27. Conductivity calculated

cond (367) (Calibration nov 07 2002)
( 2.34672450e-06*in(1)^4.9+5.11833235e-01*in(1)^2+(-4.11340249e+00)
+(-9.15501924e-05)*in(0))/(10*(1-9.57e-08*0))

28. Salinity calculated from conductivity and Temperature

salinity
(in(1)-15.)/(1.+.0162*(in(1)-15.))*(.0005-.0056*sqrt(in(0))-.0066*in(0)
-.0375*in(0)*sqrt(in(0))+.0636*in(0)*in(0)-.0144*in(0)*in(0)*sqrt(in(0)))
+(.008-.1692*sqrt(in(0))+25.3851*in(0)+14.0941*in(0)*sqrt(in(0))
-7.0261*in(0)*in(0)+2.7081*in(0)*in(0)*sqrt(in(0)))

29. Speed through water from Sperry doppler speed log
30. Fluoresence voltage From Seatech fluorometer (sn
31. flow through SeaChest (rough calculation liters/min)
32. Reference PAR in Volts (BioSpherical QSR-240 SN 6374) 
33. Reference PAR Volts converted to Micro Moles IN(0) /8.42E-18/6.022E17*1E4
34. Dynacon/hydro  tension #s
35. Dynacon/hydro  pay out speed M/minute
36. Dynacon/hydro meters out
37. Dynacon/hydro Max tension (resets when program is stopped)
38. Markey/Deep Sea  tension #s
39. Markey/Deep Sea  pay out speed M/minute
40. Markey/Deep Sea  meters out
41. Markey/Deep Sea Max tension (resets when program is stopped)
                                                 