ts? TS = 12/07/14,20:23:30 --- Time Set (yr/mon/day,hour:min:sec) >rf RF = 12022374,51657728 ---- Rec space used (bytes), free (bytes) >deploy Deployment Commands: RE ----------------------- Recorder ErAsE RN ----------------------- Set Deployment Name WD = 111 100 000 --------- Data Out (Vel,Cor,Amp; PG,St,P0; P1,P2,P3) WF = 0176 ---------------- Blank After Transmit (cm) WN = 022 ----------------- Number of depth cells (1-128) WP = 00115 --------------- Pings per Ensemble (0-16384) WS = 0200 ---------------- Depth Cell Size (cm) WV = 200 ----------------- Mode 1 Ambiguity Vel (cm/s radial) BP = 005 ----------------- Bottom Track Pings per Ensemble TE = 00:30:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100) TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec) TP = 00:14.00 ------------ Time per Ping (min:sec.sec/100) TS = 12/07/14,20:25:20 --- Time Set (yr/mon/day,hour:min:sec) EA = +00000 -------------- Heading Alignment (1/100 deg) EB = +00000 -------------- Heading Bias (1/100 deg) ED = 00400 --------------- Transducer Depth (0 - 65535 dm) ES = 33 ------------------ Salinity (0-40 pp thousand) EX = 11111 --------------- Coord Transform (Xform: Type,Tilts,3 Bm,Map) Press any key to continue EZ = 1111111 ------------- Sensor Source (C,D,H,P,R,S,T) CF = 11101 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec) CK ----------------------- Keep Parameters as USER Defaults CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY) CS ----------------------- Start Deployment >system? System Control, Data Recovery and Testing Commands: AC ----------------------- Output Active Fluxgate & Tilt Calibration data AF ----------------------- Field calibrate to remove hard/soft iron error AR ----------------------- Restore factory fluxgate calibration data AX ----------------------- Examine compass performance AZ ----------------------- Zero pressure reading CB = 811 ----------------- Serial Port Control (Baud; Par; Stop) CP # --------------------- Polled Mode (0 = NORMAL, 1 = POLLED) CZ ---------------------- Power Down Instrument FC ----------------------- Clear Fault Log FD ----------------------- Display Fault Log OL ----------------------- Display Features List PA ----------------------- Pre-Deployment Tests PC1 ---------------------- Beam Continuity PC2 ---------------------- Sensor Data PS0 ---------------------- System Configuration PS3 ---------------------- Transformation Matrices RR ----------------------- Recorder Directory Press any key to continue RF ----------------------- Recorder Space used/free (bytes) RY ----------------------- Upload Recorder Files to Host >ps0 Instrument S/N: 9397 Frequency: 307200 HZ Configuration: 4 BEAM, JANUS Match Layer: 10 Beam Angle: 20 DEGREES Beam Pattern: CONVEX Orientation: UP Sensor(s): HEADING TILT 1 TILT 2 TEMPERATURE Temp Sens Offset: -0.29 degrees C CPU Firmware: 16.28 [0] Boot Code Ver: Required: 1.13 Actual: 1.13 DEMOD #1 Ver: ad48, Type: 1f DEMOD #2 Ver: ad48, Type: 1f PWRTIMG Ver: 85d3, Type: 6 Board Serial Number Data: C0 00 00 00 C3 B4 30 09 REC727-1000-04E 10 00 00 00 C3 A0 B3 09 CPU727-2000-00J E4 00 00 00 C3 55 17 09 DSP727-2001-04G 8C 00 00 00 C3 71 4F 09 PIO727-3000-00F >ol FEATURES --------------------------------------------------------------------- Feature Installed --------------------------------------------------------------------- Bottom Track Yes Water Profile Yes High Resolution Water Modes No Lowered ADCP No Wave Gauge Acquisition No Shallow Bottom Mode No High Rate Pinging No See your technical manual or contact RDI for information on how to install additional capability in your WorkHorse. >pa PRE-DEPLOYMENT TESTS CPU TESTS: RTC......................................PASS RAM......................................PASS ROM......................................PASS RECORDER TESTS: PC Card #0...............................DETECTED Card Detect............................PASS Communication..........................PASS DOS Structure..........................PASS Sector Test (short)....................PASS PC Card #1...............................NOT DETECTED DSP TESTS: Timing RAM...............................PASS Demod RAM...............................PASS Demod REG...............................PASS FIFOs....................................PASS SYSTEM TESTS: XILINX Interrupts... IRQ3 IRQ3 IRQ3 ...PASS Wide Bandwidth...........................PASS Narrow Bandwidth.........................PASS RSSI Filter..............................PASS Transmit.................................PASS SENSOR TESTS: H/W Operation............................PASS >pc1 BEAM CONTINUITY TEST When prompted to do so, vigorously rub the selected beam's face. If a beam does not PASS the test, send any character to the ADCP to automatically select the next beam. Collecting Statistical Data... 43 40 37 37 43 40 38 37 43 40 39 37 43 40 38 37 43 40 38 37 43 39 38 37 43 39 38 37 42 39 38 37 42 39 38 37 42 39 38 37 42 39 38 37 42 39 38 37 42 39 38 37 42 39 38 37 42 39 38 37 42 39 38 37 42 39 38 37 42 39 37 37 42 39 37 37 42 39 37 37 42 39 37 37 42 39 38 37 42 39 38 37 42 39 38 37 42 39 38 37 42 39 38 37 42 39 38 37 42 39 39 37 42 39 39 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 39 37 42 39 39 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 40 37 42 39 39 37 42 39 39 37 42 39 39 37 42 39 39 37 42 39 39 37 42 39 39 37 Rub Beam 1 = PASS Rub Beam 2 = PASS Rub Beam 3 = PASS Rub Beam 4 = PASS >pc2 Press any key to quit sensor display ... All Sensors are Internal Only. Heading Pitch Roll Up/Down Attitude Temp Ambient Temp PRESSURE 103.69ø -1.09ø 1.39ø Up 19.49øC 19.57øC 0.0 kPa 103.89ø -0.96ø 1.51ø Up 19.49øC 19.55øC 0.0 kPa 103.92ø -0.92ø 1.82ø Up 19.50øC 19.57øC 0.0 kPa 109.04ø -1.11ø 2.93ø Up 19.55øC 19.56øC 0.0 kPa 105.99ø -1.34ø 9.42ø Up 19.54øC 19.57øC 0.0 kPa 106.21ø -1.29ø 2.86ø Up 19.56øC 19.57øC 0.0 kPa >0 py t Ambient Temperature = 19.53 Degrees C Attitude Temperature = 19.69 Degrees C Internal Moisture = 8E38h >pt3 Correlation Magnitude: Wide Bandwidth Lag Bm1 Bm2 Bm3 Bm4 0 255 255 255 255 1 158 155 164 166 2 15 2 11 22 3 32 50 46 35 4 72 81 75 69 5 58 47 50 53 6 22 17 6 4 7 20 32 28 21 High Gain RSSI: 42 39 38 36 Low Gain RSSI: 17 15 9 8 SIN Duty Cycle: 51 51 51 49 COS Duty Cycle: 47 48 49 49 Receive Test Results = $00000000 ... PASS >pt4 IXMT = 1.6 Amps rms [Data=89h] VXMT = 57.4 Volts rms [Data=61h] Z = 36.6 Ohms Transmit Test Results = $0 ... PASS >p5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 255 255 0 0 0 0 0 0 0 0 255 255 255 255 0 0 0 0 0 0 0 0 0 0 0 0 255 255 255 255 Electronics Test Results = $00000000 >pt6 Receive Bandwidth: Sample bw bw bw bw bw rate expect Bm1 Bm2 Bm3 Bm4 307 120 73 69 72 73 Khz results PASS PASS PASS PASS >pt7 RSSI Time Constant: RSSI Filter Strobe 1 = 38400 Hz time Bm1 Bm2 Bm3 Bm4 msec cnts cnts cnts cnts 1 5 6 6 5 2 11 12 11 11 3 16 17 16 16 4 20 22 20 20 5 24 26 23 23 6 27 28 26 26 7 29 31 28 28 8 32 33 30 31 9 33 35 32 32 10 35 37 33 34 nom 46 46 41 43 result PASS PASS PASS PASS >rr Recorder Directory: Volume serial number for device #0 is c497-71b7 9397D000 000 12022374 07-14-12 7:15:46p r a [ 2] Bytes used on device #0 = 12022374 Total capacity = 63680512 bytes Total bytes used = 12022374 bytes in 1 files Total bytes free = 51657728 bytes >s4 Ping Sequence: W W W W W W W W W W W W W W W W W W W BW W W W W W W W W W W W W W W W W W W BW W W W W W W W W W W W W W W W W W W BW W W W W W W W W W W W W W W W W W W W BW W W W W W W W W W W W W W W W W W W BW W W W W W W W W W W W W W W W W W W >ad Display factory calibration data or active calibration data [f or a]?a ACTIVE FLUXGATE CALIBRATION MATRICES in NVRAM Calibration date and time: 4/8/1911 17:48:24 S inverse Ú ¿ Bx ³ 4.2602e-01 4.4312e-01 6.0654e-03 -2.5487e-02 ³ By ³ -5.2473e-03 2.5411e-02 -1.4622e-02 -5.8112e-01 ³ Bz ³ 2.8540e-01 -2.5906e-01 4.3182e-01 -5.5709e-03 ³ Err ³ -4.8530e-01 4.5896e-01 5.9621e-01 9.4497e-03 ³ À Ù Coil Offset Ú ¿ ³ 3.0452e+04 ³ ³ 3.8873e+04 ³ ³ 2.7370e+04 ³ ³ 3.2990e+04 ³ À Ù Electrical Null Ú ¿ ³ 33894 ³ À Ù press any key to continue... TILT CALIBRATION MATRICES in NVRAM Calibration date and time: 6/15/2007 10:58:54 Average Temperature During Calibration was 24.4 øC Up Down Ú ¿ Ú ¿ Roll ³ 1.1415e-07 -1.3040e-05 ³ ³ -1.2196e-07 1.5273e-05 ³ Pitch ³ -1.3247e-05 -2.1262e-07 ³ ³ -1.4898e-05 -2.2585e-07 ³ À Ù À Ù Ú ¿ Ú ¿ Offset ³ 3.2339e+04 3.1214e+04 ³ ³ 3.1072e+04 3.2089e+04 ³ À Ù À Ù Ú ¿ Null ³ 33249 ³ À Ù >a ------------------------------------------------------------------------------ RDI Compass Error Estimating Algorithm Press any key to start taking data after the instrument is setup. Rotate the unit in a plane until all data samples are acquired... rotate less than 5ø/sec. Press Q to quit. N NE E SE S SW W NW N ^ ^ ^ ^ ^ Û ******************************** *************** ****** ** **** *** ******************************************************************************************************* Accumulating data ... Calculating compass performance ... >>> Total error: 10.1ø <<< Press D for details or any other key to continue... >z ERR 010: UNRECOGNIZED COMMAND >c Powering Down