Revised July 2001
APPLICATION NOTE NO. 18-3
Application note in pdf format
To minimize chances of corrosion, avoid metal-to-metal contact of the aluminum instrument case with the mounting device -- e.g., use insulating tape or heat-shrink tubing over stainless steel hose clamps if they are used to mount the instrument.
The instrument case is filled with dry nitrogen. If it is necessary to open the case at any time, refill the case with nitrogen to prevent possible condensation at low temperatures.
The pin configuration on the instrument case is :
![[HRule Image]](../images/div.gif){kind=small}
Sea-Bird Home Phone: 425-643-9866 Fax: 425-643-9954 E-mail: seabird@seabird.com